SPECIALIST SUPPLIERS OF
WORKING AT HEIGHT
AND SITE SAFETY PRODUCTS

WHY USE NO LIMIT™ SCAFFOLDING SYSTEM?

The MonZon NO LIMIT™ SCAFFOLDING SYSTEM is developed as a result of many years of research and studies by our engineering department.

We have worked together with scaffolders and users from all over the world, from the construction industry to the oil and gas sector, to find problem areas that need to be solved and their requirements for a scaffolding system ready for the future.

The requirements were clear; scaffolders and users want ONE SYSTEM that can be built FASTER, one system that is as FLEXIBLE as tubes and couplers but also as EASY to erect as frame scaffolds.

The system must be LIGHT and STRONG to improve ERGONOMIC and ENVIRONMENTAL aspects with NO compromises on SAFETY.

We are very proud to present NO LIMIT™ – the new concept in the scaffolding industry! Take a look at how we did it.

Cerified (not yet in Germany) or conforms according to the following standards

SAFE AND FLEXIBLE

The NO LIMIT™ system uses the metric grid system. The O-Ledgers, PSI-Transoms, PSI-Decks, MonZon Toeboards™ and MonZon Guardrails™ allow you to mount scaffolds from 25-300 cm in 25 cm intervals in any 90° direction. You can also use Variable Corner Decks for erecting round scaffolds with angles from 0-90°.

The possibility to mount your system with both frames and standards in the same scaffold makes your planning more flexible. Just put in a PSI-Frame if you run out of Standards or vice versa. You can also erect a narrower 75 cm scaffold, continue with a 300 cm wide platform and then go to 150 cm decking using the same components with the same strength. Can you see that NO LIMIT™ is the ONE SYSTEM for everything?

ONE SYSTEM FOR EVERYTHING

The ambition in the design work has been to meet our users’ needs and wishes about ONE SYSTEM for handling all problems they encounter on a daily basis as scaffolders. Take a deep look at the pictures to make up your own opinion if we have succeeded or not.

TIMESAVING WITH NO LIMIT™

Your timesaving potential with NO LIMIT™ is of course dependent on the complexity of the scaffolds you mount. If you erect straight forward facade scaffolds you will benefit from fewer parts with our developed autolocking system for decking and toeboards.

You will save a lot of time using the MonZon Guardrail™ with its patented flexible wedge heads. You will also save time combining PSI-Frames and Standards because both alternatives use the same components for all types of scaffolds. This means that you can use NO LIMIT™ for any type of scaffolding project.

THE PSI-PROFILE IS THE KEY

The PSI-Transom in aluminium is very strong and easy to handle. Along with the PSI-Decking and the smart PSI-Couplers they create an autolocking system which gives great flexibility and timesavings.

THE PSI-PROFILE

From the Greek alphabet, the 23rd letter Ψ shares the shape with our ultra strong “PSI” profile. In English this letter is pronounced “sai” or “psai” and will be written “PSI-” for a new range of products in the NO LIMIT™ scaffolding system.

COUPLERS – THE WAY TO CONNECT

PSI-Transoms in combination with the PSI-Couplers make NO LIMIT™ extremely flexible and fast to assemble. You can easily fasten the different PSI-Couplers anywhere on a PSI-Transom or a PSI-Lattice Beam for solving the most difficult scaffolding challenges.

FLEXIBLE LAYOUT - NO LIMIT™ DECKING

PSI-Decks and PSI-Transoms are available in 25 cm increments. This allows for easy mounting around obstacles.
It also saves labor time compared to using timber to cover gaps.

The handlebars also divide the load to the other PSI-Deck because of the unique locking device.

The PSI-Deck autolocks onto the PSI-Transom. No extra locking part is needed.

The PSI-Combi Deck comes in aluminium or fiberglass/aluminium with a 50 cm width. Perfect choice when using PSI-Frames.

The PSI-Deck comes only in aluminium with a 25 cm width.


NO LIMIT™ = LIGHTWEIGHT

NO LIMIT™ scaffolding system is made of HIGH QUALITY RECYCLABLE ALUMINIUM. Hydro energy is the main source of the energy used to extrude and produce the components. This makes aluminium the best ENVIRONMENTAL choice and also reduces TRANSPORT COSTS due to its lightweight and innovative design. NO LIMIT™ weighs approximately 50% less than our older MODULAR® scaffolding system in steel!

EFFICIENT LOADING - MORE MATERIAL ON YOUR TRUCK

NO LIMIT™ parts such as Standards and O-Ledgers result in fewer transports to and from the construction site. The limitation of a truck usually is the maximum weight and not the volume. In the case of a truck with a maximum load capacity of 23 tonnes, you can normally load scaffolding equipment to mount a scaffold of 6 400 m³.

With NO LIMIT™ components the number goes up to around 8 500 m³. Your advantage is approximately 33% more volume. So, a medium sized scaffolding project saves two-three trips. This means less fuel and working hours which also saves the environment. Your team needs less time to load and unload, reducing the risk of back pain and other restraints.

NO LIMIT™ VS MODULAR®

NO LIMIT™ in comparison with our older multidirectional system MODULAR® which is fully compatible with most of the German-made systems today based on bay lengths of 3.07, 2.57, 2.07 m etc.

This comparison is based on a 24 m long and 1 m wide scaffold, with 4 m to the top deck level and with a 6 m bridge span. The scaffolds had an external ladder bay at one end and stair access at the other. Both scaffolds were assembled by three experienced scaffolders with over 60 years of combined experience with similar scaffolding systems like MODULAR® but only one year of experience with NO LIMIT™.

Click below to find out more about NO LIMIT™ system

SAFE AND FLEXIBLE

The NO LIMIT™ system uses the metric grid system. The O-Ledgers, PSI-Transoms, PSI-Decks, MonZon Toeboards™ and MonZon Guardrails™ allow you to mount scaffolds from 25-300 cm in 25 cm intervals in any 90° direction. You can also use Variable Corner Decks for erecting round scaffolds with angles from 0-90°.

HomeAbout | Contact | Blog

WHY USE NO LIMIT™ SCAFFOLDING SYSTEM?

The MonZon NO LIMIT™ SCAFFOLDING SYSTEM is developed as a result of many years of research and studies by our engineering department.

We have worked together with scaffolders and users from all over the world, from the construction industry to the oil and gas sector, to find problem areas that need to be solved and their requirements for a scaffolding system ready for the future.

The requirements were clear; scaffolders and users want ONE SYSTEM that can be built FASTER, one system that is as FLEXIBLE as tubes and couplers but also as EASY to erect as frame scaffolds.

The system must be LIGHT and STRONG to improve ERGONOMIC and ENVIRONMENTAL aspects with NO compromises on SAFETY.

We are very proud to present NO LIMIT™ – the new concept in the scaffolding industry! Take a look at how we did it.

ONE SYSTEM FOR EVERYTHING

The ambition in the design work has been to meet our users’ needs and wishes about ONE SYSTEM for handling all problems they encounter on a daily basis as scaffolders. Take a deep look at the pictures to make up your own opinion if we have succeeded or not.

The possibility to mount your system with both frames and standards in the same scaffold makes your planning more flexible. Just put in a PSI-Frame if you run out of Standards or vice versa. You can also erect a narrower 75 cm scaffold, continue with a 300 cm wide platform and then go to 150 cm decking using the same components with the same strength. Can you see that NO LIMIT™ is the ONE SYSTEM for everything?

TIMESAVING WITH NO LIMIT™

Your timesaving potential with NO LIMIT™ is of course dependent on the complexity of the scaffolds you mount. If you erect straight forward facade scaffolds you will benefit from fewer parts with our developed autolocking system for decking and toeboards.

You will save a lot of time using the MonZon Guardrail™ with its patented flexible wedge heads. You will also save time combining PSI-Frames and Standards because both alternatives use the same components for all types of scaffolds. This means that you can use NO LIMIT™ for any type of scaffolding project.

THE PSI-PROFILE

From the Greek alphabet, the 23rd letter Ψ shares the shape with our ultra strong “PSI” profile. In English this letter is pronounced “sai” or “psai” and will be written “PSI-” for a new range of products in the NO LIMIT™ scaffolding system.

THE PSI-PROFILE IS THE KEY

The PSI-Transom in aluminium is very strong and easy to handle. Along with the PSI-Decking and the smart PSI-Couplers they create an autolocking system which gives great flexibility and timesavings.

COUPLERS – THE WAY TO CONNECT

PSI-Transoms in combination with the PSI-Couplers make NO LIMIT™ extremely flexible and fast to assemble. You can easily fasten the different PSI-Couplers anywhere on a PSI-Transom or a PSI-Lattice Beam for solving the most difficult scaffolding challenges.

NO LIMIT™ = LIGHTWEIGHT

NO LIMIT™ scaffolding system is made of HIGH QUALITY RECYCLABLE ALUMINIUM. Hydro energy is the main source of the energy used to extrude and produce the components. This makes aluminium the best ENVIRONMENTAL choice and also reduces TRANSPORT COSTS due to its lightweight and innovative design. NO LIMIT™ weighs approximately 50% less than our older MODULAR® scaffolding system in steel!

The PSI-Decking can be combined in any 90° direction. PSI-Corner Decks 45° close the gaps around a pipe or cutout.

The smart PSI-Couplers can be hung anywhere on a PSI-Transom.

A Standard can be inserted through the small spacing between the PSI-Decks onto a PSI-Transom.

Three different PSI-Brackets allow for very flexible solutions.

To create a right-angled position of 90° one of the smaller holes on a Standard rosette is used. To create an angle of 45-60° one of the larger holes is used instead. This can be useful when erecting, for example, equilateral plate racks or hexagonal towers.

Call us now to enquire: +44(0)1432 817 434

With the Advance Guardrail System (AGS), no additional components are required.

Mix PSI-Frames and Standards in the same scaffold. PSI-Frames come in two versions - 75 × 200 and 100 × 200 cm.

All PSI-Decks and PSI-Access Decks have built-in keder tracks to enable local weather protecion areas.

MonZon Brickguards™ create a total safe environment for the user.

Since the PSI-Frame is open in the bottom and the PSI-Decks autolock, PSI-Frames and PSI-Decks can be removed anytime from an already erected scaffold.

Our PSI-Deck autolocks onto the PSI-Transom. No extra locking part is needed.

Our autolocking MonZon Toeboard™ uses springs to attach to the Standard. No extra locking part is needed.

No gapfiller is needed when applying PSI-Brackets.

Our MonZon Guardrail™ with flexible wedge heads eliminates the need of Vertical Brace and is safe and fast to assemble.

PSI-Couplers and PSI-Transoms can be installed at any 25 cm point in any direction. Standards can be mounted in any joint.

The PSI-Transom also comes in a reinforced 10 cm high version.

Transom to Transom Coupler. Self-locks when the wedge is in place. The PSI-Decks can be put in any direction around it.

Standard to Transom Coupler, single. With one-way connection. Self-locks when the wedge is in place. The PSI-Decks can be put in any direction around it.

Standard to Transom Coupler, double. With two-way connection. Self-locks when the wedge is in place. The PSI-Decks can be put in any direction around it.

Tube to Transom Couplers can be used to connect a Scaffolding Tube between two PSI-Transoms for load sharing.

The low weight makes the assembly and dismantling of the scaffold safer and more efficient.

The risk for repetitive strain injuries is drastically reduced since the material handled daily is much lighter.

Lower weight reduces transports, fuel consumption and the wear on the roads. These points have a positive impact on the environment.

Because of lower weight, more material can be loaded on the truck which means that the transports between the warehouse and the construction site will be fewer.

Standards with a weight of 320 kg including the Pallet 80. Full truck load fits 1 716 pieces with a total weight of 10 574 kg vs 27 334 kg (Standards 300 cm made in steel) including Pallets 80 and 65 cm.

MonZon Guardrails™ with a weight of 414 kg including Pallet 225 cm.

MonZon Toeboards™ with a weight of 1 104 kg including Pallet 225 cm.

PSI-Decks with a weight of 573 kg including Pallet 225.

Aluminium Pallets come in three different sizes and can be stacked on each other.

49% lower weight with NO LIMIT™

26% fewer components with NO LIMIT™

33% faster assembly with NO LIMIT™

50% less labour costs with NO LIMIT™

ABOUT          |          PRODUCTS          |          CONTACT          |          LEACH'S

BEACON PARK
228 HOLME LACY ROAD
HEREFORD
HR2 6BQ

+44 (0)1432 818149

Leach’s is a trading name of “Beacon Group International Products Limited” registered in England and Wales, No. 8270847. Registered address: Mercury House, Shrewsbury Business Park, Shrewsbury, Shropshire, SY2 6LG

Call us now to enquire: +44(0)1432 817 434

Watch the full video here